undefined
undefined
undefined
+
  • undefined
  • undefined
  • undefined

Carbon Monoxide Catalyst

The honeycomb-type carbon monoxide catalytic oxidation catalyst is a structured catalyst prepared by loading precious metals or molecular sieves onto a honeycomb ceramic support. It has the characteristics of a low complete conversion temperature, wide industrial application range, low ignition temperature, good resistance to sulfur and chlorine, low pressure drop, large gas flow rate, fast reaction speed, and no backmixing. Its main function is to remove carbon monoxide from the exhaust gas, meeting environmental protection requirements.

Classification:

Keyword:

Carbon Monoxide Catalyst

Product Consulting:

  • Product Description
  • The carbon monoxide catalyst is prepared using corundum honeycomb ceramic as the carrier, with special coating materials and high content of precious metals as the active components. It is specifically used for removing carbon monoxide produced by incomplete combustion of various combustible gases.
    Under the conditions of a temperature of 230–280℃ and a space velocity of 0.3×10⁴–1×10⁴ h⁻¹, after being treated with this catalyst, the concentration of carbon monoxide in the outgoing gas can be reduced to below 0.5 ppm. The catalytic mechanism is to promote the reaction of carbon monoxide with oxygen to form carbon dioxide, and the catalyst has the regeneration ability and can be reused.

    Performance:

    1. The stable performance is its prominent advantage, as it can maintain efficient catalysis even in a high humidity environment.
    2. It has a good catalytic effect on low-concentration carbon monoxide gas.
    3. Compared with traditional water-rejecting carbon monoxide catalysts, this catalyst demonstrates significant advantages in both performance and application.

    Carbon Monoxide Catalyst

    Project

    Quality indicators

    Appearance

    Cube or rectangular prism

    Size/mm

    100*100*50/150*150*100

    Thickness of the outer wall/mm

    0.5

    Inner wall thickness

    0.32

    Burn-off reduction

    <5%

    Specific heat capacity(J/kg·k)

    850-1000

    Volume density(kg/m³)

    700-900

    Maximum operating temperature

    1350℃

    Note: Material composition, cell density, and dimensions can be customized to meet specific technical requirements. Contact us for technical datasheets, application-specific recommendations, and engineering support. 

Product inquiry

If you have experienced our products, you may as well tell us your true feelings. Your satisfaction is the driving force for us to move forward, and your suggestions are our precious wealth for continuous improvement.

Customer Service Hotline

0799-6233165

Tel/WeChat/WhatsApp:+8618079942828

E-mail/Zoom:jlee@pxrjhb.cn
Address: No. 1-269, Zone B, Industrial Park, Xiangdong District, Pingxiang City, Jiangxi Province

Customer Service

Copyright: Rongjian Environmental Protection Chemical Filler Co., Ltd

Website construction:300.cn